Esthetic Ants Mesh Nests Instructions

← All product instructions

3D-printed nests with a water tray. This page has the same steps as the printed card that comes with your order, so you can find them again any time.

Setting up

  1. 1
    Identify the parts
    The nest is the white plastic “maze”; this is where the ants live. The outworld (optional, sold separately) is a clear box where they find food.
  2. 2
    Unbox and inspect
    Peel any protective film off the acrylic.
  3. 3
    Fill the water tray
    Fill the tray with tap water using a pipette/syringe. The water evaporates up through the mesh to keep the nest humid. The mesh should look damp, not soaked.
  4. 4
    Connect the outworld (optional)
    Two vinyl tubes come with this nest. Push the wider 12.7 mm tube into the outworld, slide the thinner 9.5 mm tube into it, then push the other end of the 9.5 mm tube into the nest port. Sizes vary slightly (metric vs imperial); seal a loose fit with hot glue or silicone. Plug unused holes with cotton.

Living in your Mesh nest

  1. 5
    Move the colony in
    Lay the test tube at the nest entrance and cover the nest with something dark. Warm the nest portion (e.g. with a heat cable) so they move in faster. The nest is big enough once the colony would fill 1/5 of it; 1/3 is safer.
  2. 6
    Never let it dry out
    Ants and brood (eggs, larvae, pupae) need humidity to survive. Check the tray every few days and top it up before it runs empty.
  3. 7
    Add heat (optional)
    A heat cable speeds up colony growth. Run it along one section of the side or top of the nest. The top is best: it keeps water droplets from forming on the acrylic.

Good to know

  • Adjust to your ants: crowding the warm side? Move the heat closer; the cool side, farther. Crowding the damp side? Add more water; the dry side, less.
  • Optional: brush Fluon (anti-escape coating) on the outworld rim.
  • Heavy fog on the acrylic means it's too wet. Let the tray run lower.
  • Feed in the outworld, never the nest: leftovers grow mould.

Products this guide covers

Small Mesh NestSmall Mesh NestMedium Mesh NestMedium Mesh NestLarge Mesh NestLarge Mesh NestXL Mesh NestXL Mesh NestRed Shield for Mesh NestsRed Shield for Mesh Nests

Still need help? Contact us

Email: canada.ant.colony@gmail.com
Call/text: 778-268-4576 · Owner: 437-213-9082
Français : 514-512-2017 · 中文 Chinese: 647-962-9560

More guides: all product instructions · ant care sheets · ant-keeping guides

← All product instructions

Back to blog

Ant Keeping Is For Everyone

If you're interested in supporting us, check out some of our ant farm kits!