All-in-One Starter Kit Instructions

← All product instructions

A Ytong nest, a live ant colony and everything to care for it. This page has the same steps as the printed card that comes with your order, so you can find them again any time.

Setting up

  1. 1
    What's in your kit
    An ant colony in its test tube, an Esthetic Ants Ytong nest (the red or green plastic box with porous grey Ytong inside, where the ants will live), a Down The Ant Hill outworld (the clear acrylic box), plus a micro feeder, Fluon, featherweight forceps and a pipette/syringe.
  2. 2
    Settle your colony first
    Follow your “After receiving your ants” card before anything else. It explains how to check on your ants and when they are ready for a nest.
  3. 3
    Unbox and check the chimney
    Peel the protective film off the cover. The chimney is the red/green tube you pour water into; if it popped off in shipping, lay the nest flat, and press it back in.
  4. 4
    Water the nest
    Fill the chimney with tap water using the pipette/syringe. It takes several fills. The Ytong darkens as it gets wet: aim for partly dark, not soaked.
  5. 5
    Connect the outworld
    Push the wider 12.7 mm vinyl tube into the outworld, slide the thinner 9.5 mm tube into it, then push the other end into the nest port. Plug unused outworld holes with cotton.

Caring for your colony

  1. 6
    Add Fluon (optional)
    For extra escape protection, paint Fluon (anti-escape coating) under the outworld's ledge and let it dry.
  2. 7
    Move the colony in
    Place the test tube in the outworld at the tubing and cover the nest with something dark. Warm the nest portion (e.g. with a heat cable) so they move in faster. The nest is big enough once the colony fills 1/5 of it; 1/3 is safer. Not big enough yet? Keep them in their tube with a 2 cm piece of drink straw pushed under the cotton, so they can use the outworld as a foraging area.
  3. 8
    Feed your colony
    Put sugar water in the micro feeder. For protein, offer freshly dead insects with the forceps, cut up for small colonies. Harvester and pavement ants can also eat our seed mix.
  4. 9
    Never let it dry out
    Refill the water port so the Ytong is always partly dark.

Good to know

  • Adjust to your ants: crowding the warm side? Move the heat closer; the cool side, farther. Crowding the damp side? Add more water; the dry side, less.

Products this guide covers

All-in-One Starter KitAll-in-One Starter Kit

Still need help? Contact us

Email: canada.ant.colony@gmail.com
Call/text: 778-268-4576 · Owner: 437-213-9082
Français : 514-512-2017 · 中文 Chinese: 647-962-9560

More guides: all product instructions · ant care sheets · ant-keeping guides

← All product instructions

Retour au blog

L’élevage de fourmis est accessible à tous

Si vous souhaitez nous soutenir, découvrez certains de nos kits de fourmilières !