Down The Ant Hill Starter Kit Instructions

← All product instructions

A Down The Ant Hill nest, a live ant colony and everything to care for it. This page has the same steps as the printed card that comes with your order, so you can find them again any time.

Setting up

  1. 1
    What's in your kit
    An ant colony in its test tube, a Down The Ant Hill nest (chambers, water tanks and rotating gates, where the ants will live), a Down The Ant Hill outworld (the clear acrylic box where they find food), plus a micro feeder, Fluon, featherweight forceps and a pipette/syringe.
  2. 2
    Settle your colony first
    Follow your “After receiving your ants” card before anything else. It explains how to check on your ants and when they are ready for a nest.
  3. 3
    Attach the outworld
    Slide the small attachment into the grooves of the nest, then secure it in the outworld with the small screw. Put the side of the nest with the smaller chambers against the outworld.
  4. 4
    Fill the water tanks
    Use the syringe to gently add tap water through the small holes in the corners, above the water tanks. Filling the tank (12 mL) is enough for most species; some ants prefer a light overfill.

Finishing your setup

  1. 5
    Set the gates
    The rotating gates open and close chambers. Only give the ants as much space as they can use. For a starting colony, close the larger chamber and open only the smallest chamber with the water tower.
  2. 6
    Plug unused holes
    Close any outworld hole you aren't using with cotton or a plug so ants can't escape.
  3. 7
    Add Fluon (optional)
    For extra escape protection, paint Fluon (anti-escape coating) under the outworld's ledge and let it dry. Keep it dry.
  4. 8
    Move the colony in
    Place the test tube in the outworld with the cotton pulled back, and cover the nest with something dark. Warm the nest portion (e.g. with a heat cable) so they move in faster. Not ready yet? Keep them in their tube with a 2 cm piece of drink straw pushed under the cotton, so they can use the outworld as a foraging area.
  5. 9
    Feed your colony
    Fill the micro feeder vial with sugar water and stand it in the outworld. For protein, place freshly dead insects in the outworld with the forceps; cut them up for small colonies. Harvester ants and pavement ants can also eat our seed mix. Feed in the outworld, never the nest.

Caring for your colony

  1. 10
    Open space as they grow
    When the open chamber gets crowded, rotate a gate to open the next one. Additional nests can be slid into the expansion grooves for additional space.
  2. 11
    Never let it dry out
    Refill the tanks with the syringe before they run empty.
  3. 12
    Add heat (optional)
    Run a heat cable along one section of the side or top of the nest.

Good to know

  • Adjust to your ants: crowding the warm side? Move the heat closer; the cool side, farther. Crowding the damp side? Add more water; the dry side, less.
  • Shake the Fluon every 2–3 weeks so it doesn't settle.
  • Leftover food grows mould; remove it every day or two.

Products this guide covers

Down The Ant Hill Starter KitDown The Ant Hill Starter Kit

Still need help? Contact us

Email: canada.ant.colony@gmail.com
Call/text: 778-268-4576 · Owner: 437-213-9082
Français : 514-512-2017 · 中文 Chinese: 647-962-9560

More guides: all product instructions · ant care sheets · ant-keeping guides

← All product instructions

返回博客

人人都可以养蚂蚁

如果您有兴趣支持我们,不妨看看我们的蚂蚁农场套件!